Editorial illustration of a blue abstract print resting on a larger pale working sheet, with extra paper visible around the smaller rectangle.
Editorial illustration of a finished sheet on a larger working sheet; not a scaled production proof.

The brief says A3, but the paper specification says SRA3. That can be a sensible distinction rather than a mistake: one size describes the finished page, while the other describes a larger sheet used along the way.

The important question is what the customer should receive. Changing the artwork to fill the larger paper could turn a correct A3 design into the wrong finished size.

Two sizes, two jobs

A3 measures 297 × 420 mm. SRA3 measures 320 × 450 mm. Antalis’s paper-format chart lists the sizes separately. Turn either sheet around and the order of its dimensions changes; it does not become a different format.

A manufacturer’s catalogue makes the distinction concrete. Canon Production Printing’s media table lists A3 and SRA3 versions of the same named paper, with different sheet dimensions. The product name and weight therefore do not settle the size question.

These are public reference examples, not a statement about which paper Time for Designs stocks. Their useful point is that A3 and SRA3 are separate entries, not two spellings for the same rectangle.

The finished edge can sit inside the working sheet

The public abstract for ISO 217, covering untrimmed paper sizes, describes sheet ranges intended to be trimmed to the sizes covered by ISO 216. A working sheet and the page cut from it have different roles.

For a piece intended to finish at A3, a larger sheet can provide space outside that finished rectangle. That makes it possible to discuss artwork extending beyond the trim, required printer’s marks and the production layout without treating the edge of the supplied sheet as the edge of the finished item.

But the paper dimensions do not specify that layout. They do not tell you where the printer can place an image, what area equipment needs to hold the sheet, or how the job will be cut. Those requirements still belong in the agreed production specification.

What the extra millimetres mean

Compare the two portrait rectangles. The SRA3 sheet is 23 mm wider and 30 mm taller than the A3 page. If the finished rectangle were placed exactly in the centre, the geometric space around it would be:

DirectionDifference across the whole sheetSpace on each side if centred
Across the width320 − 297 = 23 mm11.5 mm left and right
Along the height450 − 420 = 30 mm15 mm above and below

This is a calculation from the stated dimensions, not a printer test or a cutting tolerance. It does not mean that every millimetre is available for artwork, or that these numbers are the bleed required for your job.

The calculation is useful because it shows where a misunderstanding starts. “There is extra paper” and “this is the usable printing area” are different statements. Only the first follows directly from those two sheet sizes.

Keep the artwork tied to the finished size

If the required item is A3, keep that finished-size instruction clear when supplying the file. Do not enlarge the design to 320 × 450 mm simply because those dimensions appear on a paper listing. Enlarging the entire page also changes the text, photographs and distances within it.

Ask which file dimensions and export settings the producer wants. A PDF may include an agreed area beyond its finished trim; the sheet used for production is another part of the job. Neither is an instruction to stretch the design automatically.

For a business-printing enquiry, state the finished dimensions, whether print should reach the edges, and what the item will become. Supply the original artwork and identify any size shown on a reference print. That lets the discussion separate the object you want from the paper and layout used to make it.

A3 answers “How big should the finished page be?” SRA3 can answer a different question about the working sheet. Keeping those answers separate is more useful than trying to make every size on the paperwork identical.

Sources and scope

The linked Antalis chart and Canon table supply the dimensions. ISO’s public abstract supplies the distinction between untrimmed and trimmed formats; its full paid standard was not used. The centred clearances are original arithmetic, not measured machine margins. The lead is an editorial illustration, not an actual customer job or a scaled proof.